RESEARCH ARTICLE


Effect of Sample Pooling on the Cycle Threshold Value in RT-PCR Testing for COVID-19 and Logistic Savings



Hiba Sami1, *, Nusrat Perween1, Parvez A. Khan1, Haris M. Khan1
1 Department of Microbiology, Aligarh Muslim University, Aligarh, India


Article Metrics

CrossRef Citations:
3
Total Statistics:

Full-Text HTML Views: 2654
Abstract HTML Views: 1190
PDF Downloads: 650
ePub Downloads: 394
Total Views/Downloads: 4888
Unique Statistics:

Full-Text HTML Views: 1231
Abstract HTML Views: 564
PDF Downloads: 433
ePub Downloads: 247
Total Views/Downloads: 2475



Creative Commons License
© 2021 Sami et al.

open-access license: This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International Public License (CC-BY 4.0), a copy of which is available at: https://creativecommons.org/licenses/by/4.0/legalcode. This license permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

* Address correspondence to this author at Department of Microbiology, Aligarh Muslim University, Aligarh, India; E-mail: hibasamizafar@gmail.com


Abstract

Background:

This ongoing coronavirus disease 2019 (COVID-19) pandemic is a great challenge for our health-care systems and their infrastructure. Diagnostic confirmation of infected individuals based on RT-PCR is important for the containment of viral spread because, despite high viral loads, the infection can be asymptomatic. For overcoming the issue of limited supplies in low socio-economic countries like ours, pooling of specimens was proposed as a method to screen a large number of patients. To analyse the effect of pooling of samples on the sensitivity of RT-PCR, we compared Cycle threshold (Ct) values of pools with those of the deconvoluted (individual) samples.

Materials and Methods:

From March 2020 to October 2020, we performed COVID-19 testing by RT-PCR on samples from areas with varying prevalence of COVID-19 referred to VRDL, JNMCH, Aligarh. For circumventing the limited availability of RNA extraction and PCR reagents, pool testing was started. 5 samples were pooled together, and these pools were tested by RT-PCR. Negative pools were reported as negative, whereas positive pools were deconvoluted, and each sample was tested individually. In this study, 408 pools comprising of 2040 samples were analysed.

Observations and Results:

In our study, a ΔCt value of 0.96 (i.e., an increase in Ct value in the pooled sample as compared to individual sample) was found that shows a slight loss of PCR sensitivity in pooled samples, which is relatively small compared to the inherent clinical sensitivity of the standard assay. But the cost-effectiveness and the ability to reserve resources are considerably high.

Conclusion:

As pooling of samples is a cost-effective way for COVID--19 testing, the slight loss in the sensitivity of RT-PCR can be overcome by considering the Ct cut-off value for positive pools slightly above the kit cut off value to circumvent the dilution effect.

Keywords: RT-PCR, Ct value, Cost effectivity, COVID-19, Diagnosis, RNA.



1. INTRODUCTION

1.1. Novel Coronavirus

This ongoing coronavirus disease 2019 (COVID-19) pan- demic is a great challenge for our health-care systems and their infrastructure. It has highlighted the need for early diagnosis of the disease for the better containment of this outbreak. Diag- nostic confirmation of infected individuals based on RT-PCR is important for containing viral spread because, despite high viral loads, the infection can be asymptomatic. Sufficient molecular diagnostic capacity is important for public health interventions, such as case detection and isolation [1]. The rapid diagnosis of COVID-19 in both symptomatic and asymptomatic patients can shed light on transmission patterns and facilitate contact tracing [2, 3]. To date, countries that were able to screen patients swiftly have fared better in containing the COVID-19 outbreak and suppressing the mortality rate associated with the disease [3].

Protocols for RNA RT-PCR testing of Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) became available early in the pandemic, yet the infrastructure of testing laboratories is stretched and, in some areas, it is overwhelmed [4]. Later on, the testing for SARS-CoV-2 has been limited due to the considerable strain on global supply chains for PCR kits, reagents, personal protective equipment, and other consum- ables [2, 5].

1.2. Economic approach for Testing Covid-19

For overcoming the issue of limited supplies in low socio-economic countries like ours, pooling of specimens was proposed as a method to screen a large number of patients for infection. It typically involves combining multiple patient specimens into a single test sample and then testing these pooled samples. This approach has the advantage of cost-effectiveness and speedy reporting. It was also used to retrospectively screen for COVID-19 in specimens that were negative for common respiratory viruses earlier in the course of the pandemic in the United States [6]. Specimen pooling has also been used in screening efforts for several other infectious diseases, including donated blood samples for HIV [7-10].

It is unclear how pooling biological samples would affect the sensitivity and the false-negative rate of Polymerase Chain Reaction (PCR) assays. To analyse the effect of pooling of samples on the sensitivity of RT-PCR, we compared Cycle threshold (Ct) values of pools that tested positive with Ct values of individual samples that tested positive.

2. MATERIALS AND METHODS

Between March and October 2020, we performed COVID-19 testing by RT-PCR from areas with varying prevalence of COVID-19 referred to VRDL, JNMCH, Aligarh. In the initial days, samples were being tested individually, but due to the increasing workload of testing pool testing was started to circumvent the limited availability of RNA extraction reagents. Five samples were pooled together, and then these pools were tested by RT-PCR. Negative pools were reported as negative, whereas positive pools were deconvoluted, and each sample was tested individually (Fig. 1). In this study, we studied data of 408 pools comprising of 2040 samples ; CT values of pools were compared and analysed with respect to deconvoluted samples.

2.1. Calculation of Delta Ct (ΔCt): Sensitivity of Pool Testing

The delta Ct value (ΔCt) was defined as the absolute change in Ct value when the pooled sample was tested compared to when the positive samples were tested individually. A positive ΔCt value (i.e., an increase in Ct value in the pooled sample) represented the loss of PCR sensitivity attributable to sample pooling.

2.2. Calculation of the Effect of SARS-CoV-2 Prevalence, Pool Size on Efficiency and Logistics

The effect of SARS-CoV-2 prevalence, pool size on efficiency and logistics was derived by the web-based application, utilizing the R statistical software environment available at: http://www.chrisbilder.com/shiny/.

3. RESULTS AND DISCUSSION

3.1. Sensitivity of Pool Testing

The mean Ct of the positive sample in each pool, the mean Ct of the pooled sample, and the mean ΔCt are shown in Table 1.

Table 1. Mean Ct values of pooled sample, positive samples in the pool and ΔCt.
Pool Size Mean Ct of Positive Samples in the Pool (Standard Deviation, Range) Mean Ct of the Pool (Standard Deviation, Range) Mean ΔCt
(Range)
5 samples 26.56 (3.93, 14 to 34) 27.51 (4.33, 15 to 37) 0.956 (-8 to +12)

In our study, a ΔCt value of 0.96 (i.e., an increase in Ct value in the pooled sample as compared to individual sample) was found, that shows a slight loss of PCR sensitivity in pooled samples which is relatively small compared to the inherent clinical sensitivity of the standard assay. But the cost-effectiveness and the ability to reserve resources are considerably high.

Fig. (1). Illustration of sample processing.

Fig. (2). Relation between Ct values of the pool and the mean of Ct Values of Individual positive samples in the pool.

3.2. Relation between Ct Values of the Pool versus mean of Ct Values of Individual Positive Samples

As expected, the Ct values of the pool showed a near-perfect linear relation with the mean of Ct Values of individual positive samples in the pool (Fig. 2)

3.3. Effect of SARS-CoV-2 Prevalence and Pooling on the Efficiency and Logistics

Table 2 and Fig. (3) shows the number of extraction and PCR reactions required for testing of samples in the pool size of 5 based on disease prevalence (inclusive of initial pool testing and deconvolution of positive pools).

Table 2. Effect of SARS-CoV-2 prevalence and pooling on efficiency and logistics.
Prevalence of COVID-19 (%) Five-sample Pools
Number of Tests Per Sample Number of Tests for 1000 Samples Saving of the Reagents and Test Cost
(Percentage)
0.5 0.23 230 77
5 0.43 430 57
10 0.61 610 39
15 0.76 760 24
20 0.87 870 13
Fig. (3). Effect of SARS-CoV-2 prevalence and pooling on efficiency and logistics.

3.4. Determining the Optimal Pool Size for Effective Testing

As the PCR-positivity is a function of the net viral load in the pooled sample, we understand

that the success of the pooling strategy as a sensitive screening tool would be dependent on the number of infected patients in the pool and the viral load in the individual samples. While pooled sample testing offers the advantage of cost-effectiveness and timely reporting, the strategy becomes less useful in communities where the prevalence of the disease is high. With increased prevalence, the number of positive pools is likely to increase, and more pools are to be deconvoluted for identifying the positive individuals negating the advantages, such as cost-effectiveness and time-saving. Furthermore, with the increase in the prevalence of the disease, the negative predictive value (NPV) of the diagnostic test for the disease decreases, leading to higher false-negative results. Based on this premise, national advisories have suggested testing of 5 sample pools for COVID-19 in communities with the prevalence of up to 5% [11].

3.5. Advantages of Pooling Strategy with Respect to Logistics

To understand the advantages of a pooling approach, consider a laboratory receiving N = 200 samples; 40 pools will be made out of it, and as the prevalence is 5%, therefore, 10/200 samples will be positive as a best-case scenario, i.e., we can have 4 pools positive and 16 pools negative and the total PCR reagent used to test 200 samples will be 60. In the worst-case scenario, 10 pools will be positive thus, the total reagent used will be 90. Therefore, taking the mean value as 75, we propose that for 200 samples in pooled testing, we require 75 test reagents, thus saving 62.5% reagents. The present study is concordant with the findings of Abdal Hamid et al., who reported that pool testing is effective in saving resources in the population having a prevalence less than 5% [12].

In this study, A ΔCt value of 0.96 (i.e., an increase in Ct value in the pooled sample as compared to individual sample) was found that shows a slight loss of PCR sensitivity in pooled samples which is relatively small compared to the inherent clinical sensitivity of the standard assay [13]. Our ΔCt value is quite less (0.9) as compared to others like Garg et al., who found a mean difference of 5.0 [14].

Duringn the COVID-19 pandemic, pooling of samples started as a method for testing large no. of samples to save resources which later became a highly practiced phenomenon in low socio-economic countries. A recent study by Lohse showed that over a range of pool sizes, from 4 to 30 samples per pool, Ct values of positive pools fall between 22 and 29 for the envelope protein gene (E-gene) assay and between 21 and 29 for the spike protein gene (S-gene) assay. Ct values were lower in retested deconvoluted positive samples. The Ct values for both E-gene and S-gene assays in pools and deconvoluted positive samples were below 30 and can easily be categorized as positive. Ct value differences between pooled tests and deconvoluted positive samples (Ct pool − Ct positive sample) were in the range of up to 5 [15]. It can be explained by the fact that for each two-fold dilution, Ct value increased by 1.24 [16]. Thus, in pooled samples, graphs should be analysed for the sigmoid curve even beyond Ct value 40, and in the case of the appearance of any graph, the RT-PCR should be repeated with deconvoluted samples, and by following the above-mentioned precautions, we can pick maximum possible positive cases.

CONCLUSION

During a rapidly changing pandemic, testing strategies will need to adapt to increase the potential to test maximum possible samples with low resources, in the least possible time with a quality result. This study showed that pooling is an effective approach to expand the impact of limited test resources and reagents during specific stages of an infectious disease outbreak as it provides quality reports in less time, cost, and manpower. As pooling of samples is a cost-effective way for COVID--19 testing, the slight loss in the sensitivity of PCR can be overcome by considering the Ct cut-off value for positive pools slightly above the kit cut-off value to circumvent the dilution effect. Also, group testing of pooled specimens requires the use of highly sensitive assays to avoid missing low positive samples. In addition, the impact of different extraction methods on the recovery of RNA and overall test sensitivity needs further evaluation.

ETHICS APPROVAL AND CONSENT TO PARTICIPATE

Not applicable.

HUMAN AND ANIMAL RIGHTS

Not applicable.

CONSENT FOR PUBLICATION

Not applicable.

AVAILABILITY OF DATA AND MATERIALS

The authors confirm that the data supporting findings of this study are available within the article.

FUNDING

None.

CONFLICT OF INTEREST

The authors declare no conflict of interest, financial or otherwise.

ACKNOWLEDGEMENTS

We acknowledge the support of Dr. Syed Ghazanfar Ali, Dr. Islam, Mr. Zeeshan, Mr. Shah Alam, Mr. Farhan, Mrs. Shibli Javed and Mr. Sanaullah for their tireless efforts in RT-PCR testing, without which this study would not have been possible.



REFERENCES

[1] Koo JR, Cook AR, Sun Y, et al. Interventions to mitigate early spread of SARS-CoV-2 in Singapore: A modelling study. Lancet Infect Dis 2020; 20(6): 678-88.
[2] Emanuel EJ, Persad G, Upshur R, et al. Fair allocation of scarce medical resources in the time of COVID-19. N Engl J Med 2020; 382(21): 2049-55.
[3] Cohen J, Kupferschmidt K. Countries test tactics in ‘war’ against COVID-19. Science 2020; 367(6484): 1287-8.
[4] Corman VM, Landt O, Kaiser M, et al. Detection of 2019 novel coronavirus (2019-nCoV) by real-time RT-PCR. Euro Surveill 2020; 25(3): 25.
[5] Tanne JH, Hayasaki E, Zastrow M, Pulla P, Smith P, Rada AG. COVID-19: How doctors and healthcare systems are tackling coronavirus worldwide. BMJ 2020; 368: m1090.
[6] Hogan CA, Sahoo MK, Pinsky BA. Sample pooling as a strategy to detect community transmission of SARS-CoV-2. JAMA 2020; 323(19): 1967-9.
[7] Stramer SL, Glynn SA, Kleinman SH, et al. Detection of HIV-1 and HCV infections among antibody-negative blood donors by nucleic acid-amplification testing. N Engl J Med 2004; 351(8): 760-8.
[8] Pilcher CD, Fiscus SA, Nguyen TQ, et al. Detection of acute infections during HIV testing in North Carolina. N Engl J Med 2005; 352(18): 1873-83.
[9] Klausner JD, Grant RM, Kent CK. Detection of acute HIV infections. N Engl J Med 2005; 353(6): 631-3.
[10] Pilcher CD, Eron JJ Jr, Galvin S, Gay C, Cohen MS. Acute HIV revisited: new opportunities for treatment and prevention. J Clin Invest 2004; 113(7): 937-45.
[11] Wang W, Xu Y, Gao R, et al. Detection of SARS-CoV-2 in Different Types of Clinical Specimens. JAMA 2020; 323(18): 1843-4.
[12] Abdalhamid B, Bilder CR, McCutchen EL, Hinrichs SH, Koepsell SA, Iwen PC. Abdal hamid B, Bilder CR, McCutchen EL, Hinrichs SH, Koepsell SA, Iwen PC. Assessment of specimen pooling to conserve SARS CoV-2 testing resources. Am J Clin Pathol 2020; 153(6): 715-8.
[13] ICMR. 2020; Advisory on feasibility of using pooled samples for molecular testing of COVID-19. J Med Virol 93(3): 1526-31.
[14] Garg J, Singh V, Pandey P, et al. Evaluation of sample pooling for diagnosis of COVID-19 by real time-PCR: A resource-saving combat strategy. J Med Virol 2021; 93(3): 1526-31.
[15] Lohse S, Pfuhl T, Berkó-Göttel B, et al. Pooling of samples for testing for SARS-CoV-2 in asymptomatic people. Lancet Infect Dis 2020; 20(11): 1231-2.
[16] Yelin I, Aharony N, Shaer Tamar E, Argoetti A, Messer E, Berenbaum D, et al. Evaluation of COVID-19 RT-qPCR test in multi-sample pools. Clin Infect Dis 2020; 71(16): 2073-8.